Refina RFX210 Floor Stripper
Refina
Refina RFX210 Floor Stripper
Lifts vinyl, lino and tiles fast
- 210 mm blade
- Up to 60 m² per hour
DeWalt DCS565 18V Circular Saw
DeWalt
DeWalt DCS565 18V Circular Saw
Cordless circular saw (18V XR brushless)
A compact cordless circular saw for cutting out water-damaged floorboards, chipboard and skirting, and cutting new timber and sheet materials for repairs.
- 18V XR brushless
- 165 mm blade
- 55 mm cut at 90°
- Bevels to 50°
Daily and weekly rates – call 07971 435221 or send an enquiry
About the DeWalt DCS565 18V Circular Saw
The DeWalt DCS565 is a compact, cordless circular saw used by carpenters, joiners and builders. The brushless motor gives fast, clean cuts through timber and sheet materials, and there is no lead to trail through a wet property.
In flood work it is used to cut out water-damaged floorboards, chipboard flooring and skirting, so wet areas can be opened up, dried and replaced. The LED light and dust blower keep the cut line clear, and the electronic brake stops the blade quickly when you release the trigger.
Best for
- Cutting out water-damaged floorboards and chipboard
- Removing wet skirting and timber
- Cutting new timber and sheet materials for repairs
- Working where there is no safe power supply
Specification
| Detail | Value |
|---|---|
| Model | DCS565 |
| Type | Cordless circular saw |
| Voltage | 18V XR (brushless) |
| Batteries and charger | [Supplied with hire – CONFIRM] |
| No-load speed | 4950 rpm |
| Blade diameter | 165 mm |
| Blade bore | 20 mm |
| Maximum cut depth at 90° | 55 mm |
| Maximum cut depth at 45° | 42 mm |
| Bevel capacity | Up to 50°, tool-free adjustment |
| Shoe | Aluminium |
| Safety features | Electronic motor brake, lock-off switch |
| Other features | LED work light, dust blower, rafter hook, DeWalt AirLock compatible |
| Supplied with | 24-tooth precision saw blade, rip fence, blade spanner, dust extraction spout |
Questions about the DeWalt DCS565 18V Circular Saw
What would I use it for after a flood?+
Cutting out water-damaged floorboards, chipboard and skirting so the area underneath can be dried, and cutting new materials for the repair.
Does it come with batteries?+
[Yes – supplied with 18V XR batteries and a charger. CONFIRM]
How deep does it cut?+
Up to 55 mm at 90°, and 42 mm at a 45° bevel.
Can I connect it to a vacuum?+
Yes. A dust extraction spout is supplied, and it is compatible with DeWalt's AirLock extraction system.
Do you deliver and collect?+
Yes. We deliver and collect across Wiltshire, Swindon, Bath, Bristol, Somerset and north Dorset, within roughly an hour of Trowbridge. We can set the machine up for you, or drop it off with instructions.
How long can I hire it for?+
By the day or by the week. Weekly hire works out cheaper, and most drying jobs need at least a week. Call us and we will advise how long your job is likely to take.
How much does it cost to hire?+
Call 07971 435221 or send an enquiry and we will give you a price for your dates, including delivery.
Is the machine checked before it goes out?+
Yes. Every machine is checked before each hire.
What if it stops working during the hire?+
Switch it off at the wall and call us. We will talk you through it or swap the machine.
Can you do the job for me instead?+
Yes. We handle the whole job, from drying and strip-out through to repairs and reinstatement. Call 07971 435221 to talk it through. Flood damage repairs
Safety information
- Read the operating instructions supplied before use. If you have not used this type of equipment before, ask us to show you how it works when we deliver it.
- Wear the right protection for the job: safety glasses, hearing protection, gloves and safety boots, and a suitable dust mask wherever dust is created.
- Check leads, plugs, hoses and blades before each use. Do not use anything that is damaged.
- Use an RCD-protected supply. On 110V, use a correctly rated site transformer.
- Keep power leads away from water, blades and moving parts, and route them so they are not a trip hazard.
- Switch off and unplug (or remove the battery) before changing blades, filters or accessories, and before cleaning or moving the equipment.
- Flood water can contain sewage and chemicals. Wear gloves, wash your hands after use, and do not eat or drink in the work area.
- Where electrics may have been affected by flood water, do not use any sockets until they have been checked by a qualified electrician.
- Keep children and pets away from the work area.
- If the equipment makes an unusual noise, smells of burning or stops working, switch it off and call us on 07971 435221. Do not open the casing or attempt repairs.
General safety – tools and cleaning equipment
Specific to this unit
- Before cutting into any floor or wall, check for hidden pipes and cables using a detector.
- Set the blade depth only slightly deeper than the material you are cutting.
- Remove the battery before changing the blade or making any adjustment.
- Keep both hands on the saw and let the blade stop completely before putting it down.
- Wear safety glasses, hearing protection and a dust mask.
Enquire about the DeWalt DCS565 18V Circular Saw
Other equipment you might need
Vacmaster Power 30 PTO Wet and Dry Vacuum
Vacmaster
Vacmaster Power 30 PTO Wet and Dry Vacuum
30-litre wet and dry vac for water and debris
- 30 L tank
- 1500 W
Corroventa T2 Turbine
Corroventa
Corroventa T2 Turbine
Dries under floors and inside walls
- 180 m³/h airflow
- 260 mbar pressure