Corroventa T2 Turbine
Corroventa
Corroventa T2 Turbine
Dries under floors and inside walls
- 180 m³/h airflow
- 260 mbar pressure
Corroventa C25 Hose System
Corroventa
Corroventa C25 Hose System
Hose kit for pressure and suction drying
A larger-bore hose kit for pressure and suction drying across bigger floor areas, connecting directly to the drying turbine.
- 6-way junction box
- 6 × 4 m Ø25 mm hoses
- 8 nozzles
- Ø50 mm connection hose
Daily and weekly rates – call 07971 435221 or send an enquiry
About the Corroventa C25 Hose System
The C25 hose system is the larger of Corroventa's two hose kits. Its 25 mm hoses carry more air, making it the better choice for drying under larger floor areas. Couplings are pressed into pre-drilled holes with rubber seals, giving a quick, airtight setup.
The junction box connects to the turbine with a 50 mm hose, and the C16 system can plug into it when extra, smaller outlets are needed.
Best for
- Water under larger floating floors
- Screeds and insulated floor voids
- Bigger areas where more airflow is needed
Specification
| Detail | Value |
|---|---|
| Type | Hose system for pressure and suction drying |
| Junction box | 1 × C25 junction box, 6 × 25 mm with 6 covers |
| Connection hose | 1 × Ø50 mm |
| Hose clamps | 2 × 44–56 mm |
| T-connectors | 2 |
| Nozzles | 8 |
| Angle couplings | 6 × Ø25 mm |
| Hoses | 6 × Ø25 mm, 4 m each, with couplings |
| Supplied in | Bag or box |
| Connects to | Corroventa turbines and combi machines; accepts the C16 hose system |
Questions about the Corroventa C25 Hose System
What is in the kit?+
A 6-way junction box with covers, a 50 mm connection hose, 2 hose clamps, 2 T-connectors, 8 nozzles, 6 angle couplings and 6 × 4 m hoses.
Do I need a turbine as well?+
Yes. It connects to the Corroventa T2 turbine, which moves the air. For pressure drying, the Corroventa A2 supplies the dry air.
Can I add more outlets?+
Yes. The C16 hose system can be connected to the C25 junction box to add more, smaller outlets.
Do you deliver and collect?+
Yes. We deliver and collect across Wiltshire, Swindon, Bath, Bristol, Somerset and north Dorset, within roughly an hour of Trowbridge. We can set the machine up for you, or drop it off with instructions.
How long can I hire it for?+
By the day or by the week. Weekly hire works out cheaper, and most drying jobs need at least a week. Call us and we will advise how long your job is likely to take.
How much does it cost to hire?+
Call 07971 435221 or send an enquiry and we will give you a price for your dates, including delivery.
Is the machine checked before it goes out?+
Yes. Every machine is checked before each hire.
What if it stops working during the hire?+
Switch it off at the wall and call us. We will talk you through it or swap the machine.
Can you do the drying for me instead?+
Yes. We offer a full structural drying service with moisture readings and a drying report for your insurer. Structural and building drying
Safety information
- Read the operating instructions supplied with the machine before switching on. If anything is unclear, call us first.
- Keep the machine upright. If it has been laid on its side during transport, stand it upright for at least 30 minutes before switching on.
- Plug directly into a suitable, undamaged socket. Do not use damaged leads, and if an extension lead is unavoidable, use a correctly rated one that is fully unwound.
- Use an RCD-protected supply where possible.
- Stand the machine on a firm, level surface, away from standing water.
- Keep the air inlet and outlet clear. Never cover the machine or place anything on top of it while it is running.
- Route power cables and drain hoses so they are not a trip hazard, and check the hose is not kinked or crushed.
- Keep children and pets away from the machine.
- Switch off and unplug before moving, emptying or checking the machine.
- Indoor use only. Do not use the machine outdoors or expose it to rain.
- If the machine makes an unusual noise, smells of burning, or stops working, switch it off at the wall and call us on 07971 435221. Do not open the casing or attempt repairs.
- Where electrics may have been affected by flood water, do not use any sockets until they have been checked by a qualified electrician.
Specific to this unit
- Check for hidden pipes and cables before drilling any holes.
- Keep hoses tidy and away from walkways to avoid trip hazards.
- Make sure every coupling is fully pushed in and sealed, and fit covers to any unused junction box outlets, before starting the turbine.
Enquire about the Corroventa C25 Hose System
Other equipment you might need
Corroventa C16 Hose System
Corroventa
Corroventa C16 Hose System
10-outlet hose kit for floors and walls
- 10 outlets
- 50 m hose
Corroventa A2
Corroventa
Corroventa A2
Quiet desiccant dryer for cold spaces
- Up to 16 litres per day
- 16 kg